VIEW 2
VIEW 1
SOLENOID
<=====
<=====PIVOT
<=========FLYWHEEL
POWER IN
POWER OUT
USING THE PRINCIPLE ILLUSTRATED BELOW WITH THE EXCEPTION THAT ONE MAGNET IS FIXED IN PLACE WITH AN AIR GAP. THE AIR GAP IS NECESSARY TO ALLOW THE REPULSION FIELD TO BE EASILY ESTABLISHED. NOTE THAT THIS IS ALSO APPLICABLE TO MEGS
<=========FLYWHEEL
SOLENOID
<===
Google
PAGE WILL BE UPDATED AS MORE DETAILS ARE DEVELOPED. IF YOU HAVE ANY INPUT PLEASE USE THE E-MAIL  ADDRESS BELOW
You may also join my group in order to submit your suggestions and anything else that you would like to add to my website that would be helpful
MY YOU TUBE CHANNEL
http://groups.yahoo.com/group/overunitybuilders
MAGNETS
COILS
IRON RODS
BELOW IS AN ALTERNATE ARRANGEMENT FROM THE ONE ILLUSTRATED ABOVE. THE SOLENOID COILS ARE ENERGIZED TO REPEL THE MAGNETS AT THE CLOSEST APPROACH.THEN ALLOWED TO ATTRACT BACK TO THE COIL WITHOUT POWER AND REVERSING THE FIELD OF THE IRON ROD CORE WHICH INDUCES A REVERSE CURRENT IN THE COIL. THIS WILL RESULT IN AN AC OUTPUT WITH A DC INPUT IF A SECONDARY COIL IS ADDED TO THE SOLENOID. THIS CAN BE USED IN A VARIATION OF THE BOB TEAL TYPE MOTOR. THIS WILL GIVE ADDITIONAL TORQUE AND WILL ADD TO THE COLLAPSE AND REVERSAL OF THE FIELD GIVING BETTER OUTPUT FROM THE SECONDARY COIL(NOT SHOWN HERE)
POWER OFF
POWER ON
PLEASE DONATE =>
YOUR SUPPORT WILL HELP ME TO KEEP GOING
BOB TEAL MOTOR VIDEOS
LINK TO EYE ON NORWAY BELOW
THIS PAGE IS ABOUT SIMPLE TO BUILD DEVICES THAT INCORPORATE THE PRINCIPLES FOUND ON MY PRINCIPLES PAGE AND CAN BE BUILT WITH A MINIMUM OF EFFORT. WATCH THE VIDEOS ON THIS PAGE AND VISIT THE PRINCIPLES PAGE. BETWEEN THE TWO YOU SHOULD GAIN ENOUGH UNDERSTANDING TO BUILD DEVICES SIMILAR TO THOSE ILLUSTRATED HERE THAT MAY PROVIDE SOME PLACE TO BEGIN YOUR EXPERIENCE IN BUILDING OVERUNITY DEVICES.
=====>>>
<<<=====
<<<=====
=====>>>
=====>>>
<<<=====
=====>>>
<<<=====
=====>>>
<<<=====
See his patent====>>>
LINK TO EYE ON THE WORLD BELOW
LINK TO EYE ON THE USA BELOW
http://www.vorktex.ca/
 
http://www.gap-power.com/
http://www.veljkomilkovic.com/ THE PENDULUM GENERATOR
EXTERNAL LINKS
Pendulum Power
PEMM Motor Harnesses Anti-matter and Electron-Avalanche
LINK TO EYE ON THE UK BELOW
EUROPEAN UNION
LINK TO EYE ON THE EU BELOW
LINK TO EYE ON THE UN BELOW
UPDATED NOV 19, 2014
browser caching disabled
ALL LINKS ON THIS SITE TESTED SAFE WITH MCAFEE SITEADVISOR
http://www.gap-power.com/index.html
MUST SEE!
MOVIES
SOLENOID MOTORS
http://downloads.solarbotics.com/PDF/SunSwinger_1.0-Jan11-2006.pdf
http://downloads.solarbotics.com/PDF/SunSwinger_1.0-Jan11-2006.pdf
CONTACT
INPUT OFF
INPUT ON
WEBSITE VIEWED BEST IN FIREFOX OR CHROME
http://www.gap-power.com/index.html
COPPER WIRE TO OUTPUT RECYCLED ELECTRICITY
INPUT CURRENT THROUGH IRON ROD
IN THE VIDEO ABOVE I USE A SMALL 1 INCH IRON NAIL TO CAPTURE THE OUTPUT READINGS ON THE METER. AS ILLUSTRATED BELOW APPROX 10 TURNS
BELOW IS CONCEPT FOR HIGHER AMPERAGE APPLICATIONS
<<<<OUTPUT
<<<<INPUT
<<<-IN THE VIDEO TO THE LEFT I REPLACED THE IRON HAMMER SHOWN BELOW WITH A MAGNET THAT IS REPELLED  WHEN CIRCUIT CLOSES TURNING ITSELF INTO A BUZZER TYPE CIRUIT. THE ADDITION OF AN IRON NAIL INTO THE INPUT CIRCUIT ENABLES INDUCTIVE CAPTURE OF THE INPUT WHEN THE CIRCUIT OPENS, THIS GIVES A HIGH OUPUT METER READING.
ALL RIGHTS RESERVED NOV 11. 2013